Trainer+ / V-Form Machine
Specification |
Measurement |
|
Box dimensions (packaged) |
54" L x 26" W x 8.7" H (1380mm L x 660mm W x 200mm H) |
|
Box weight (packaged) |
107.2 lb (48.6kg) |
| Trainer+ / V-Form dimensions |
20.5" L x 46" W x 4.5" H (520mm L x 1170mm W x 115mm H) |
| Trainer+ / V-Form weight | 80 lbs (38kg) |
| Trainer+ / V-Form rope length | 9.8ft (3m) |
| Electrical |
110 to 240V and 20Amp circuit The machine must be grounded Make sure the socket you're plugging the cable into has an earth |
|
Resistance range (each rope) |
0 to 220 lbs (0 to 100kg) |
|
Active resistance range (each rope) |
8.8 lbs to 220 lbs (4kg to 100kg) |
| Operating and exercising temperature |
41 to 86°F (5 to 30°C) |
| After use and storage temperature |
32 to 104°F (0 to 40°C) |
| Materials | Aluminium and steel frame with carbon fiber top |
| Machine handles | On either side for ease of lifting and trolleying the machine |
| Transport wheels | Located on the right-hand side for ease of trolleying the machine |
|
Trainer+ / V-Form rope |
Dyneema® core construction |
| Adjustable feet | For levelling the exercise deck during workouts |
| Sleep Mode button | Machine will go to sleep mode after 20 minutes of inactivity, it can be woken up by pressing the 'Sleep Mode' button |
| LED bar | LED's will flash for a rep count, a movement outside of range-of-motion, or when troubleshooting is required |
! Important Electrical Instruction
Warning!
Use of a GFCI (Ground Fault Circuit Interrupter) or RCD (Residual Current Machine) equipped wall outlet with this machine is essential. All premises must be equipped with such protective switches according to local codes and standards. Use of any appliance with a large motor or high-current draw may result in tripping the premises' circuit breaker, particularly if overloading or electrical shorting occurs.
When using this machine, ensure the power cord is not caught underneath the machine and is away from any moving part of the machine including the resistance ropes, handles and transport wheels.
NEVER remove any cover without first disconnecting AC power. If voltage varies by ten percent (10%) or more, the performance of your machine may be affected. Such conditions are not covered under your warranty. If you suspect the voltage is low at your premises, contact your local power company or a licensed electrician for proper testing.
NEVER expose this machine to moisture, rain or water. This machine is NOT designed for use outdoors, near a pool or spa, or in any other wet or high humidity environment. The specified operating temperature range is 41 to 86°F (5 to 30°C) and humidity is 95% non-condensing (no water drops forming on surfaces).
Circuit Breakers: Some circuit breakers used in facilities or homes are not rated for drawing high currents that can occur when some fitness machines are first turned on or even during use.
If your machine is tripping the premises' main circuit breaker (even through it is the proper current rating) but the circuit breaker on the machine itself does not trip, the circuit breaker may need to be replaced with a high-current type.
This is not a warranty defect. This is a condition that Vitruvian is not liable for and which is your sole responsibility to ensure it is safely and properly addressed. Circuit-breakers must be installed by licensed electricians according to local codes and standards. The electrical outlet used must have a dedicated 20 Amp circuit breaker.